Polypipe Overlay Heating Kits – OVERLAYPOLYPIPEKIT5M2MAN

Overlay is a unique low profile floor heating system ideal for both renovation and new build projects.

Installed over the existing floor and only 18mm in depth, Overlay allows floor heating to be installed where traditional under floor systems would either require expensive excavation or would require the floor to be raised to an unacceptable level.

The Overlay system is available in 2 panel types to allow for installation to all build types and floor coverings.

Overlay panel is a fibrous panel used for heavyweight floor coverings such as ceramics, or where the floor covering needs to be secured directly to the panel, e.g. solid wood.

Overlay systems use a 12mm pipe at 150mm pipe centres and provide excellent response times and heat output compared with traditional built in under floor heating solutions and are therefore ideal for both traditional heating systems and low temperature renewable systems.

Pack Contents:

• 1 x PB970010 – Temperature Limiting Bath Control
• 10 x PB08571 – 800 x 600 x 18mm Overlay Floor Panel
• 10 x PB08573 – 12mm Overlay End Return
• 1 x UFH8015B – 15mm x 80m UFH Coil Barrier Pipe
• 1 x PB776 – Overlay Polyurethane Foam Glue
• 2 x 15mm x 12mm Overlay Adaptor Set

Selecting the most suitable sort of Underfloor Heating is a major decision. Once you decide that Wet Underfloor Heating deliver the right answer then the Polypipe Overlay Heating Kits – OVERLAYPOLYPIPEKIT5M2MAN is undoubtedly worth factoring in to your final decision.